Setting the DC power supply (DC IN) nominal voltage
4.
Use e to select Nominal
Voltage, and press E.
5.
Use e to select the volt-
age, and press E.
HINT
• The nominal voltage is the voltage of the DC power supply
under normal conditions. This value should be indicated
on the exterior of the DC power supply.
Setting the type of AA batteries (Int AA)
4.
Use e to select Battery
Type, and press E.
5.
Use e to select the type,
and press E.
NOTE
• When multiple power supplies are connected, they will
be used in the following order of priority.
1. DC power supply (DC IN)
2. AA batteries (Int AA)
• The voltages of each power supply are shown on the
display.
F
Multi Track Field Recorder
21