Setting Up: Usb Connection, H4N Used As A Sd Card Reader - Zoom H4next Operation Manual

6-6 Setting up: USB connection, H4n used as a SD card reader

When you use the H4n as a SD card reader, make the following settings.
USB
From
power OFF
Connect H4n to computer
with USB cable.
Using USB bus power,
H4n start booting-up
Display of USB setting screen
035
1
After it's powered 'ON',
From
connect the H4n to the computer
power ON
with the USB cable.
2
Press on the top screen.
3
Select <USB> and press.
4
Select <STORAGE> and press.
NOTE:
• Before physically unplugging USB
cable (and H4n) from computer,
be sure to perform the "safely
remove hardware" function on the
computer first. Unplugging USB
cable (and H4n) without performing
this function may damage files.
• Compatible operating system
Windows XP
Mac OS X (10.2 or later)
HINT:
USB bus power
USB bus power is the method to
supply power from a computer
through the USB cable.
Connecting USB with the H4n power
off condition, H4n automatically
boots up and displays USB menu.
Usage of a SD card reader
• A computer can use the recording
data of the H4n.
• The H4n can use the music data
created on a computer.
The file names available
The H4n cannot operate the files
with the letters more than half-size
alphabets and numerals.
connection completed