Zoom F4 Operation Manual page 43

Setting value Explanation
None The scene name and number are not used.
When recording files are created, they are named
only with the take number, such as "001", "002",
"003" and so on.
s f
+ cannot be used to advance the scene
number by one.
Example: 001.wav
Current Folder The name of the currently selected folder is used
as the scene name.
s f
+ can be used to advance the scene
number by one. After advancing the scene
number by 1, the corresponding folder will be
used as the recording destination. If that folder
does not already exist, it will be created.
Example: Folder001_001.wav
Date The date is used as the scene name.
s f
+ cannot be used to advance the scene
number by one.
If recording occurs after the date changes, a
scene folder with the date will be created.
Example: 20160101_001.wav
User Name A scene name input by the user is used.
s f
+ can be used to advance the scene
number by one.
No folder is created in this case.
Example: MYSCENE001_001.wav
Editing the scene name
If Scene Name Mode is set to User Name (→ P .42), the scene
name edited here is used.
4.
Use e to select User Scene
Name, and press E.
5.
Use e to select Edit,
and press E.
6.
Changing scene names
See "Character input screen"
( → P. 1 3 ) f o r h o w t o i n p u t
characters.
NOTE
The scene name is written to the <SCENE> metadata.
You cannot put a space or an @ mark at the beginning of
the name.
F
Multi Track Field Recorder
43