Zoom F4 Operation Manual page 92

Setting signals sent to the output jacks (Routing)
Setting signals sent to the MAIN OUT
4.
Use e to select MAIN OUT
Routing, and press E.
5.
Use e to select the track for MAIN OUT 1 or MAIN
OUT 2 routing and press E.
Press to cycle through settings
• Change tracks 1–6 to postfader (cancel others)
• Change L/R tracks to postfader (cancel others)
Press to set tracks 1–6 to prefader
HINT
E
Press to cycle through the options:
Prefader → Postfader → Off.
92
Prefader selected
Postfader selected
Off
Tracks routed to MAIN OUT 1
Tracks routed to MAIN OUT 2
Clear all settings
(continued)
NOTE
• Tracks 1–6 can be set to Prefader or Postfader.
• The L/R tracks can only be set to Postfader.
• Tracks 1–6 and L/R tracks cannot be selected at the same
time. Selecting one type will deselect the other.
6.
Press m.