Setting The Automatic Timecode Recording Delay (Auto Rec Delay) - Zoom F4 Operation Manual

Setting the automatic timecode recording delay (Auto Rec Delay)

If set to record automatically when external timecode is received, unnecessary recording could occur if timecode is received for
a brief amount time. In order to prevent this, you can set the amount of time until recording starts after timecode is received.
1.
Press m.
2.
Use e to select TIMECODE
(TC), and press E.
3.
Use e to select Auto Rec
Delay, and press E.
4.
Use e to adjust the time,
and press m.
112
HINT
This can be set from 0.0 to 8.0 s.