Zoom F4 Operation Manual page 117

Setting the frequency
3.
Use e to select Frequency,
and press E.
4.
Use e to adjust the fre-
quency, and press m.
HINT
This can be set from 100 to 10,000 Hz.
Setting the routing
Set the destination for the slate tone signal.
3.
Use e to select Routing,
and press E.
4.
Use e to select the tracks/outputs for slate tone
signal routing, and press E.
Set all to postfader
NOTE
Routing to tracks 1–6 is not possible when operating as an
audio interface (Stereo Mix).
HINT
E
Press to switch between Postfader and Off.
5.
Press m.
F
Multi Track Field Recorder
Select postfader
Off
Clear all settings
117