Setting How Timecode Is Initialized At Startup (Start Timecode) - Zoom F4 Operation Manual

Setting how timecode is initialized at startup (Start Timecode)

When the F is turned off, the internal timecode stops, so the timecode is automatically initialized (jammed) during startup.
You can set the value that is used for jamming at that time.
1.
Press m.
2.
Use e to select TIMECODE
(TC), and press E.
3.
Use e to select Start TC,
and press E.
4.
Use e to set how timecode
is initialized, and press E.
Setting value Explanation
When the F starts, the value set by Restart (→ P .111) is
Restart Time
used to jam the internal timecode.
When the F starts, its timecode is restored from the
RTC
timecode when the power was turned off and advanced by
the elapsed time using the Date/Time (RTC) setting
(→ P .18).
Since RTC is less precise than internal timecode, discrep-
ancies will occur.
F
Multi Track Field Recorder
115