Supplying Power - Zoom F4 Operation Manual

Supplying power

Using AA batteries
1.
Turn the power off and then loosen the screw to open
the battery compartment cover.
2.
Remove the battery case from the battery slot.
3.
Open the battery case cover.
14
4.
Install the batteries.
＋
−
5.
Close the battery case cover.
6.
Load the battery case.
NOTE
Load the case so that the side with the protruding rail is up.
7.
Close the battery compartment cover and tighten the
screw.
NOTE
• Be careful because the battery case could become loose
unexpectedly if the battery compartment cover screw is
not tightened firmly.
• Use only one type of batteries (alkaline, NiMH or lithium)
at a time.
• After loading batteries, set "Power Source" to the correct
type of battery. (→ P .20)
• If the remaining battery power indicator becomes empty,
turn the power off immediately and install new batteries.
−
＋
−
＋
＋
−
−
＋
−
＋
−
＋