Outputting alerts through headphones (Alert Tone Level)
The volume can be adjusted for alerts output from headphones when, for example, recording starts and stops.
1.
Press m.
2.
Use e to select OUTPUT,
and press E.
3.
Use e to select HP Alert
Tone Lvl, and press E.
4.
Use e to adjust the vol-
ume, and press m.
HINT
• This can be set to Off or between −48 and −12 dBFs.
• When set to Off, no alerts will be output.
102
When alerts sound
Sound type
Remaining battery low
880Hz tone every 30 seconds 4 times
Recording starts
1000Hz tone 1 time
Recording stops
880Hz tone 2 times
Recording not possible
880Hz tone 3 times