Loading Sd Cards; Turning The Power On And Off - Zoom F6 Quick Manual

Loading SD cards

1.
Open the SD card slot cover, and insert an SD card.
HINT
To remove the SD card, push it further into the slot and then pull it out.
NOTE
Before using SD cards that have just been purchased or that have been formatted on a computer, they
must be formatted by the

Turning the power on and off

1.
Press and hold
HINT
Press and hold
NOTE
• If "No Card!" appears on the display, confirm that an SD card is inserted properly.
• If "Card Protected!" appears on the display, the SD card write-protection is enabled. Slide the lock
switch on the SD card to disable write-protection.
• If "Invalid Card!" appears on the display, the card is not formatted correctly. Format the card or use a
different card.
. To format an SD card, use Menu > SYSTEM > SD Card > Format.
to turn the power on.
to turn the power off.
5