Zoom F4 Operation Manual page 9

Connecting output from a camera
Use Input 5/6 when connecting output from a camera. Input
5/6 can be used as a return (RTN), enabling camera output to
be monitored through the F without recording (→ P .88).
Connecting mic capsules
A mic capsule can be connected to the MIC IN connector on
the back of the F.
NOTE
• The mic capsule input is assigned to tracks 5/6.
• When a mic capsule is connected, the RTN (INPUT 5/6) jack can-
not be used.
Connecting and disconnecting mic capsules
1.
Remove the protective caps from the F and the
mic capsule or extension cable.
2.
While pressing the buttons on the sides of the mic
capsule or extension cable, connect it to the main
unit, inserting it completely.
3.
To disconnect the mic capsule or extension cable, pull
it away from the main unit while pressing the buttons
on its sides.
NOTE
• Do not use too much force when disconnecting. Doing so
could damage the mic capsule or extension cable and the
main unit.
• Attach the protective cap when no mic capsule will be con-
nected for a long time.
Stereo input
By enabling the stereo link for tracks 1/2 or 3/4, the corre-
sponding Inputs (1/2 or 3/4) can be handled as a stereo pair.
(→ P .26)
When linked, Input 1 or 3 will be the left channel and Input 2
or 4 will be the right channel.
F
Multi Track Field Recorder
09