Applying Delay To Input Signals (Input Delay) - Zoom F4 Operation Manual

Applying delay to input signals (Input Delay)

If there are differences in the timing of input sounds, use this function to correct them when recording.
1.
Press m.
2.
Use e to select INPUT,
and press E.
3.
Use e to select Input
Delay, and press E.
4.
Use e to select the track,
and press E.
HINT
Select All to set all the tracks at the same time.
84
5.
Use e to adjust the delay
time, and press m.
HINT
This can be set from 0 to 30.0 ms.
NOTE
When Sample Rate is set to 192kHz, Input Delay is disabled.