Analog Output Settings - Agilent Technologies G1314B User Manual

Analog Output Settings

1 To change the Output Range of the analog outputs select VWD Control.
2 To change the offset and the attenuation select VWD Signal > More.
Figure 26 Analog Output Settings
Figure 27 Analog Output Settings
3 Change the values if required.
Agilent 1260 Infinity VWD User Manual
Special Settings of the Detector
• Analog Output Range: can be set to either 100 mV
or 1 V full scale.
• Zero Offset:can be set to either 100 mV or 1 V full
scale.
• Attenuation Limits: 0.98 to 4000 mAU at discrete
values for either 100 mV or 1 V full scale.
Using the Detector
69
4