General Safety Information - Agilent Technologies G1314B User Manual

13
Appendix

General Safety Information

General Safety Information

General Safety Information
The following general safety precautions must be observed during all
phases of operation, service, and repair of this instrument. Failure to
comply with these precautions or with specific warnings elsewhere in this
manual violates safety standards of design, manufacture, and intended use
of the instrument. Agilent Technologies assumes no liability for the
customer's failure to comply with these requirements.
Ensure the proper usage of the equipment.
WA R N I N G
The protection provided by the equipment may be impaired.
➔
Safety Standards
This is a Safety Class I instrument (provided with terminal for protective
earthing) and has been manufactured and tested according to
international safety standards.
Operation
Before applying power, comply with the installation section. Additionally
the following must be observed.
Do not remove instrument covers when operating. Before the instrument is
switched on, all protective earth terminals, extension cords,
auto- transformers, and devices connected to it must be connected to a
protective earth via a ground socket. Any interruption of the protective
earth grounding will cause a potential shock hazard that could result in
serious personal injury. Whenever it is likely that the protection has been
192
The operator of this instrument is advised to use the equipment in a manner as
specified in this manual.
Agilent 1260 Infinity VWD User Manual