NEC NEAX 2000 IPS Maintenance Manual page 81

• To provide the remote download (Main Site/Remote Site) from the MAT/CAT by Command Opera-
tion (same for office data settings of remote download at Remote Site in survival mode)
[Series 3700 R12.2 software required]
(1) To set the FTP server information, do the following programming.
START
CM0C For each Site, assign the IP address of FTP
server to download the MP program.
For each Site, assign the port number of FTP
server for file transfer (control).
NOTE:
For each Site, assign the user ID for FTP serv-
er.
NOTE:
A
DESCRIPTION
Port No. 21 is used for the file transfer (control), and Port No. 2999 is used for the file
transfer in initial data setting.
For example, when the second data is set to 3000, Port No. 3000 is used for the file transfer
(control), and Port No. 2999 is used for the file transfer.
When no user ID is assigned, log
into the FTP server with "anony-
mous".
CHAPTER 1 MAINTENANCE SERVICE FEATURES
• Y=11
(1) XX00
XX: 00: Main Site No.
01-30: Remote Site No.
(2) 000000000000-255255255255:
IP address of FTP server
CCC
NONE : No data
• Y=11
(1) XX01
XX: 00: Main Site No.
01-30: Remote Site No.
(2) 00001-65534: TCP Port No. 1-65534
CCC
NONE
• Y=11
(1) XX02
XX: 00: Main Site No.
01-30: Remote Site No.
(2) X-XXXXXXXX: User ID
X: A-Z, 0-9: Character
CCC
NONE
– 71 –
MP PROGRAM DOWNLOAD (FTP)
DATA
: Clear
: Clear
: TCP Port No. 21
(Maximum 8 characters)
: Clear
: No data NOTE
NWA-008847-001 Rev.3.0
a6ch1001.fm
JULY/01/2006