NEC NEAX 2000 IPS Maintenance Manual page 103

• If the fault that occurred when D
line status is the self-control reset of terminal, the fault logs can be registered as the fault information
(assigned by CMEA Y=2>49). In this case, D
CS, and IP-PAD is registered per card.
• To collect multiple fault logs, at least a four-second interval is required for collecting each log. Also,
you can reserve up to eight logs collection (the ninth or more reserved log is invalid).
• Since the recorded reset time of fault logs depends on the terminal clock to collect logs, it may differ
from the PBX internal clock.
CHAPTER 1 MAINTENANCE SERVICE FEATURES
term
IPs and IP-CSs login to the system or the IP-PAD card is in on-
term
IP is registered per terminal, IP-CS is registered per
"FAULT MESSAGE"
– 93 –
VoIP LOG COLLECTION
Page 10
NWA-008847-001 Rev.3.0
a6ch1001.fm