NEC NEAX 2000 IPS Maintenance Manual page 68

For Local Office
START
Assign the Originating Point Code (OPC)
CMA7
for each local office.
NOTE:
Assign which kind of fault information is
CMEA
stored into the fault information memory,
and which kind of alarm is indicated.
Specify the alarm kind sent automatically
to the Centralized MAT.
Specify the destination of fault information.
A
DESCRIPTION
The Originating Point Code is
used to designate an originating
office in the CCIS/IPT network. A
single OPC should be assigned to
all CCH/IPT numbers provided
in the same office.
CHAPTER 1 MAINTENANCE SERVICE FEATURES
• Y=01
(1) 0-7: CCH/IPT No.0-7
(2) 00001-16367: OPC
• Y=2
(1) See "FAULT MESSAGE"
(2) CHAPTER 1.
• Y=3
(1) 00 : MJ alarm
01 : MN alarm
02 : - - alarm
(2) 0 : Send
1 : Not sent
• Y=4
(1) 01 : Destination of fault information
(2) 2 : 2400 IPX MAT or Centralized
MAT
3 : 2400 IPX MAT or Centralized
MAT and RMAT
– 58 –
CENTRALIZED MAT
DATA
NOTE
of
Page 10
NWA-008847-001 Rev.3.0
a6ch1001.fm