NEC NEAX 2000 IPS Maintenance Manual page 72

• To provide the remote download (Main Site) from the MAT/CAT by Command Operation
[Series 3500 software required]
(1) To set the FTP server information, do the following programming.
START
CM0C Assign the IP address of FTP server to down-
load the MP program.
Assign the port number of FTP server for file
transfer (control).
NOTE:
Assign the user ID for FTP server
NOTE:
Assign the password for FTP server.
NOTE:
A
DESCRIPTION
Port No. 21 is used for the file transfer (control), and Port No. 20 is used for the file trans-
fer in initial data setting.
For example, when the second data is set to 3000, Port No. 3000 is used for the file transfer
(control), and Port No. 2999 is used for the file transfer.
When no user ID is assigned, log
into the FTP server with "anony-
mous".
While entering the password with
CAT "*" (asterisk) is displayed on
LCD. When entering the password
with the MOC screen, actual data is
displayed.
CHAPTER 1 MAINTENANCE SERVICE FEATURES
• Y=10
(1) 00
(2) 000000000000-255255255255:
IP address of FTP server
CCC
NONE : No data
• Y=10
(1) 01
(2) 00001-65534: TCP Port No. 1-65534
CCC
NONE
• Y=10
(1) 02
(2) X-XXXXXXXX: User ID
X: A-Z, 0-9: Character
CCC
NONE
• Y=10
(1) 03
(2) Z-ZZZZZZZZ: Password
Z: A-Z, 0-9 : Character
CCC
NONE
– 62 –
MP PROGRAM DOWNLOAD (FTP)
DATA
: Clear
: Clear
: TCP Port No. 21
(Maximum 8 characters)
: Clear
NOTE
: No data
(Maximum 8 characters)
: Clear
: No data
NWA-008847-001 Rev.3.0
a6ch1001.fm
JULY/01/2006