NEC NEAX 2000 IPS Maintenance Manual page 202

CARD NAME
PN-IPTB LINK lamp is not
(IPT) on
[PZ-M567]
Remedial Action on Each Lamp Status
LAMP FAULT
STATUS CONTENT
LAN connection
failure
CHAPTER 2 TROUBLESHOOTING
FAULT DIAGNOSIS AND TROUBLESHOOTING
REMEDIAL ACTION
Check to see if the LAN cable is
1
correctly connected.
Confirm the condition of the LAN
2
device connected to the IPT.(ex.
Power of HUB)
Confirm whether the MODE switch
3
is set to 0.
When the fault cannot be cleared
4
by
1, and set the baud (100 Mbps or 10
Mbps) by the SW2-1 switch accord-
ing to the LAN device.
If the fault cannot be cleared,
5
replace the card.
– 192 –
to above, set the MODE to
1 3
Continued on next page
NWA-008847-001 Rev.3.0
a6ch2001.fm