NEC NEAX 2000 IPS Maintenance Manual page 221

(2) At Called Station
START
At the called station, the telephone
does not ring.
The call is routed to a station other
than the dialed number.
Ringing Signal is not disconnected
after going off-hook.
END
CHAPTER 2 TROUBLESHOOTING
FAULT DIAGNOSIS AND TROUBLESHOOTING
(1) "ON" lamp on the PWR card is on.
CHECK
(2) Volume Control of the telephone set.
(1) LC card
REPLACE
(2) Telephone set
(3) PWR card (In case all station fails
within same PIM.)
(1) System Data Programming for
CHECK
destination station Number: CM10/
CM14
(2) Call Forwarding-All Calls feature is
activated at the destination station.
(1) LC card
REPLACE
(2) FP card
(3) MP card
(4) Telephone set
– 211 –
NWA-008847-001 Rev.3.0
a6ch2001.fm