NEC NEAX 2000 IPS Maintenance Manual page 29

(3) To set Alarm Kind of Fault Information using MAT Add-In (Fault Storage)
NOTE: CM08>450, 451 cannot be set by this Add-In.
STEP1: After starting up the MATWorX, select PBX
Configuration Wizard dialog to make the connection to the PBX.
STEP2: Select System
The Fault Storage dialog is displayed.
CHAPTER 1 MAINTENANCE SERVICE FEATURES
Fault Storage from the taskbar.
– 19 –
Connect from the taskbar. And follow
FAULT MESSAGE
NWA-008847-001 Rev.3.0
a6ch1001.fm