NEC NEAX 2000 IPS Maintenance Manual page 30

STEP3: Click
NOTE 1:
The "Standard" column setting of Current Fault Configuration is equal to the initial data of the
CMEA Y=2.
STEP4: To accept the standard settings, click
STEP5: To change the standard settings, click
Then click
NOTE 2:
Some Standard settings of the fault kind cannot be changed by this Add-In.
. Current Fault Configuration is displayed.
to update the data settings into the PBX.
CHAPTER 1 MAINTENANCE SERVICE FEATURES
.
and select the alarm kind.
– 20 –
FAULT MESSAGE
Click this button
NWA-008847-001 Rev.3.0
a6ch1001.fm