FRONT CYLINDER HEAD COVER
• Remove the right and left head cover brackets 1.
• Remove the front cylinder head cover 2 and its gasket.
FRONT CAMSHAFT
• Turn the crankshaft to bring the "F I T" line mark on generator
rotor to the index mark of the valve inspection hole and also to
bring the cams to the position as shown.
NOTE:
At the above condition, the front cylinder is at TDC on expansion
stroke and also the engraved lines A on the camshafts are par-
allel with the mating surface of the cylinder head cover.
• Remove the cam chain tension adjuster cap bolt 3, washer
and spring.
• Remove the front cam chain tension adjuster No. 2 4 and
gasket.
ENGINE
3-17
F
T