Suzuki VZR1800 2007 Service Manual page 144

OIL FILTER
• Install the oil filter with the special tool. (!2-18)
% 09915-40610: Oil filter wrench
OIL PUMP DRIVE GEAR AND DRIVEN GEAR
• Install the washer 1 and pin 2.
NOTE:
Be careful not to drop the washer 1 and pin 2 into the crank-
case.
• Install the oil pump driven gear 3.
• Install the snap ring 4.
GEAR POSITION SWITCH
• Apply SUZUKI SUPER GREASE "A" to the O-ring.
NOTE:
Align the gear position switch pin A with the gearshift cam hole
B.
) 99000-25010: SUZUKI SUPER GREASE "A"
• Install the gear position switch 3 as shown.
• Apply THREAD LOCK SUPER to the gear position switch
bolts.
. 99000-32110: THREAD LOCK SUPER "1322"
NOTE:
Fit the gromet C.
• Hold the primary driven gear with the special tool and tighten
its bolt to the specified torque.
% 09930-44541: Rotor holder
# Primary driven gear bolt: 95 N·m (9.5 kgf-m, 68.5 lb-ft)
or equivalent
or equivalent
ENGINE 3-87