• Remove the swingarm pivot bearings 1 with the special
tools.
% 09923-74511: Bearing remover set
09930-30104: Sliding shaft
$
The removed bearings must be replaced with new
ones.
CUSHION LEVER BEARING
• Insert the spacer into bearings and check the play when mov-
ing the spacer up and down.
• If excessive play is noted, replace the bearings with a new
one.
• Remove the dust seals 1.
• Remove the cushion lever upper bearings with the special
tool.
% 09913-70210: Bearing installer set (25 mm)
$
The removed bearings must be replaced with new
ones.
• Draw out the cushion lever lower bearings with the special
tool.
% 09921-20240: Bearing remover set (20 mm)
$
The removed bearings must be replaced with new
ones.
CHASSIS
9-43