4-28
DRIVELINE/AXLE
• Apply SUZUKI BOND to the mating surface of final gear case.
& 99000-31140: SUZUKI BOND "1207B" or equivalent
• Install the stopper plate F to the final gear case.
$
When installing the plate, fit the protrusion B of plate
to the one of the bearing stopper grooves.
NOTE:
Two kinds of plates are available to lock the stopper at the
proper position.
• Apply SUZUKI BOND to the mating surface of swingarm.
& 99000-31140: SUZUKI BOND "1207B" or equivalent
• Apply Lithium Base Molybdenum grease (NLGI#2) to the pro-
peller shaft spline.
FINAL GEAR CASE INSTALLATION
NOTE:
To install the final gear case easily, move the dust boot front and
the universal joint turn into the propeller shaft.