Suzuki VZR1800 2007 Service Manual page 351

8-14 COOLING AND LUBRICATION SYSTEM
• Remove the water pump cover 3.
• Remove the impeller securing bolt by holding the impeller with
a water pump pliers.
• Remove the mechanical seal ring 4 and rubber seal 5 from
the impeller.
• Remove the impeller shaft 6, washer 7 and O-ring 8.
• Remove the mechanical seal with the special tool.
% 09921-20240: Bearing remover set (12 mm)
NOTE:
If there is no abnormal condition, the mechanical seal removal is
not necessary.
!
The removed mechanical seal must be replaced with a
new one.