• Apply a small quantity of THREAD LOCK to the bearing
retainer screws 8 and gearshift arm stopper bolt 9.
• Tighten the bearing retainer screws 8, gearshift arm stopper
bolt 9 and gearshift fork shaft retainer plug 0 to the specified
torque.
& 99000-32050: THREAD LOCK "1342" or equivalent
* 99000-32030: THREAD LOCK SUPER "1303"
# Gearshift arm stopper bolt: 19 N·m (1.9 kgf-m, 13.5 lb-ft)
Gearshift fork shaft retainer plug:
OIL JET
Removal
• Remove the piston cooling oil jets 1 and oil jets 2 from the
upper crankcase.
• Remove the oil jets 3 (for front and rear cylinder head side).
or equivalent
35 N·m (3.5 kgf-m, 25.5 lb-ft)
ENGINE
3-63