Suzuki VZR1800 2007 Service Manual page 414

PISTON SEAL
• Install the piston seals as shown in the illustration.
O-RING
• Install the new O-ring 1 and reassemble caliper halves.
$
Replace the O-ring with a new one.
• Temporarily tighten the air bleeder valve 2.
• Tighten each bolt to the specified torque.
# Front brake caliper housing bolt 3:
% 09930-11920: Torx bit JT40H
09930-11940: Bit holder
• Install the spring to the caliper, bring its wider side of pawl A
facing top.
22 N·m (2.2 kgf-m, 16.0 lb-ft)
Dust seal
Piston seal
CHASSIS 9-57
Caliper body