Suzuki VZR1800 2007 Service Manual page 157

3-100 ENGINE
CYLINDER
• Fit the dowel pins and new gaskets 1 to the crankcase front
and rear.
!
Use the new gaskets to prevent oil leakage.
• Apply a small quantity of MOLYBDENUM OIL SOLUTION to
the sliding surface of the pistons and cylinder walls.
" MOLYBDENUM OIL SOLUTION
NOTE:
The cylinders can be distinguished by the embossed-letters,
"FR" and "RR".
"FR": Front (#2) cylinder
"RR": Rear (#1) cylinder
• Hold the piston rings in proper position, and insert each of the
pistons into the respective cylinders.
• Tighten the cylinder nuts temporarily.
CYLINDER HEAD
• Pull the cam chains out of the cylinders and install the cam
chain guides No. 2 1.
NOTE:
There are the guide holders for the bottom ends of each cam
chain guide cast in the crankcase. Be sure that the cam chain
guides are inserted properly.
"FR"
"RR"
Front
Rear
Front