• Remove the handlebar holder 9 from the steering stem
upper bracket.
• Remove the following parts.
INSPECTION AND DISASSEMBLY
Inspect the removed parts for the following abnormalities.
* Handlebars distortion
* Distortion of the steering stem.
* Bearing wear or damage
* Abnormal noise of bearing
If any abnormal points are found, replace defective parts with
the new ones.
• Remove the steering stem lower bearing with a chisel.
$
The removed lower bearing must be replaced with a
new one.
• Drive out the steering stem bearing outer races (upper and
lower) using the steel rod.
$
The removed bearing outer race must be replaced with
a new one.
0 Bolt
A Rubber cushion
B Rubber washer
C Washer
CHASSIS
9-25