Suzuki VZR1800 2007 Service Manual page 178

• Remove the oil seal with the special tool.
# 09913-50121: Oil seal remover
$
The removed oil seal must be replaced with a new one.
• Remove the driven gear stopper with the special tool.
# 09913-70210: Bearing installer set (30 mm)
• Remove the bearings (1, 2) and oil seal housing 3 with the
special tools.
# 09921-20240: Bearing remover set (30 mm)
09941-64511: Bearing remover
09930-30104: Sliding shaft
DAMPER SPRING
Measure the free length of the damper spring. If the length is
shorter than the service limit, replace the spring with a new one.
% Damper spring free length
Service limit: 64.6 mm (2.54 in)
SPEEDOMETER SENSOR ("10-37)
DRIVELINE/AXLE 4-7