Installation - Suzuki VZR1800 2007 Service Manual

INSTALLATION

Remount the swingarm and shock absorber in the reverse order
of disassembly and removal, and pay attention to the following
points.
CUSHION ROD AND CUSHION LEVER
• Install the cushion rods 1 and cushion lever 2 onto the swin-
garm temporarily.
SWINGARM
• Before installing the swingarm, install the boot and the univer-
sal joint.
NOTE:
Make sure that the "UP" mark A on the boot faces to up.
• Tighten the swingarm pivot shaft to the specified torque with
the special tool.
% 09944-28320: Hexagon socket
# Swingarm pivot shaft: 100 N·m (10.0 kgf-m, 72.5 lb-ft)
NOTE:
After tightening the swingarm pivot shaft, be sure to check the
swingarm operation.
CHASSIS 9-49