Suzuki VZR1800 2007 Service Manual page 146

SECONDARY DRIVE GEAR
• Change the gear position to the 1st or 2nd.
• Hold the primary driven gear with the special tool.
% 09930-44541: Rotor holder
• Apply a small quantity of THREAD LOCK SUPER to the sec-
ondary drive gear bolt and tighten its to the specified torque.
* 99000-32030: THREAD LOCK SUPER "1303"
# Secondary drive gear bolt:
GEARSHIFT COVER
• Install the dowel pins and gasket 1.
"
Use new gasket to prevent oil leakage.
• Install the gearshift cover and tighten its bolts.
NOTE:
Apply grease to the oil seal lip before installing the gearshift
cover.
) 99000-25010: SUZUKI SUPER GREASE "A"
or equivalent
160 N·m (16.0 kgf-m, 115.5 lb-ft)
or equivalent
ENGINE 3-89