Suzuki VZR1800 2007 Service Manual page 197

4-26 DRIVELINE/AXLE
• Install the inner race 5, washer 6, bearing 7 and inner race
8, with the special tool.
# 09913-84510: Bearing installer
NOTE:
When installing the bearing, stamped mark on the bearing must
face outside.
• Install the correct shims 9 to the final drive bevel gear and
install the bevel gear to the final gear case.
Shim adjustment ("4-23)
• Apply SUZUKI SUPER GREASE "A" to the O-ring and the lip
of oil seal.
• Install the bearing stopper 0.
$
Use a new oil seal and O-ring to prevent oil leakage.
' 99000-25010: SUZUKI SUPER GREASE "A"
• Tighten the bearing stopper to the specified torque with the
special tool.
# 09924-62410: Final drive gear bearing holder wrench
! Final drive bevel gear bearing stopper:
• Install the final drive gear coupling A and washer B.
• Apply a small quantity of the THREAD LOCK SUPER to the
final drive gear coupling nut.
( 99000-32030: THREAD LOCK SUPER "1303"
or equivalent
110 N·m (11.0 kgf-m, 79.5 lb-ft)
or equivalnet