Eee (Energy Efficient Ethernet) - TRENDnet TI-PG541i User Manual

6-port hardened industrial gigabit poe+ layer 2 managed din-rail switch
Hide thumbs Also See for TI-PG541i:
Table of Contents

Advertisement

TRENDnet User's Guide
configure
no mac-vlan entry
STRINGS
configure
no mac-vlan all
Example:
TI-PG541I(config)#mac-vlan 00:01:02:03:04 vlan 111 priority 1
TI-PG541I(config)#mac-vlan 00:01:02:22:04 vlan 121 priority 1
TI-PG541I(config)#mac-vlan 00:01:22:22:04:05 vlan 221 priority 1
Web Configuration
Advanced Settings > VLAN > MAC VLAN
Parameter
Description
MAC Address
Configures the leading three or more bytes of the MAC address.
VLAN
Configures the VLAN.
Priority
Configures the 802.1Q priority.
Action
Click the "Delete" button to delete the protocol VLAN profile.
© Copyright 2016 TRENDnet. All Rights Reserved.
This command deletes a mac-vlan entry.
This command deletes all of the mac-vlan
entries.

EEE (Energy Efficient Ethernet)

The Energy Efficient Ethernet (EEE) is an IEEE 802.3az standard that is designed to reduce
power consumption in Ethernet networks during idle periods.
EEE can be enabled on devices that support low power idle (LPI) mode. Such devices can
save power by entering LPI mode during periods of low utilization. In LPI mode, systems
on both ends of the link can save power by shutting down certain services. EEE provides
the protocol needed to transition into and out of LPI mode in a way that is transparent to
upper layer protocols and applications.
Notice: This feature is for Ethernet copper ports only.
Default Settings
All ports' EEE states are disabled.
CLI Configuration
Node
Command
enable
show interface
[IFNAME]
power efficient-
interface
ethernet auto
no power efficient-
interface
ethernet auto
Example:
TI-PG541I#configure terminal
TI-PG541I(config-if)#interface gigabitethernet1/0/1
TI-PG541I(config-if)#power efficient-ethernet auto
TI-PG541I(config-if)#no power efficient-ethernet auto
TI-PG541i
Description
This command displays the current port
configurations.
The command enables EEE on the specified
interface. When EEE is enabled, the device
advertises and auto negotiates EEE to its link
partner.
The command disables EEE on the specified
interface.
43

Advertisement

Table of Contents
loading

Table of Contents