TRENDnet TI-PG541i User Manual page 31

TRENDnet User's Guide
Parameter Description
Port Select a port or a range ports you want to configure on this screen.
State Select Enable to activate the port or Disable to deactivate the port.
Select the speed and duplex mode of the port. The choices are:
• Auto
• 10 Mbps / Full Duplex
Speed/Duplex
• 10 Mbps / Half Duplex
• 100 Mbps / Full Duplex
• 100 Mbps / Half Duplex
• 1000 Mbps / Full Duplex
Select On to enable access to buffering resources for the port thus
Flow Control ensuring lossless operation across network switches. Otherwise,
select Off to disable it.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Port
This field displays the port number.
State
This field displays whether the port is enabled or disabled.
This field displays the speed either 10M, 100M or 1000M and the
Speed/Duplex
duplex mode Full or Half.
Flow Control
This field displays whether the port's flow control is On or Off.
This field displays the link status of the port. If the port is up, it
Link Status
displays the port's speed, duplex and flow control setting.
© Copyright 2016 TRENDnet. All Rights Reserved.
Otherwise, it displays Link Down if the port is disabled or not
connected to any device.
Information
Basic Settings > Port Settings > Information
Parameter Description
Port Select a port or a range ports you want to configure on this screen.
Description Configures a meaningful name for the port(s).
Port Status
Port This field displays the port number.
Description The meaningful name for the port.
The field displays the detail port status if the port is blocked by
Status
some protocol.
Uptime The sustained time from last link up.
Medium Mode The current working medium mode, copper or fiber, for the port.
TI-PG541i
21