TRENDnet TI-PG541i User Manual page 72

TRENDnet User's Guide
POP3 Server (Incoming
pop.mail.yahoo.com
Messages)
Yahoo Mail Plus Server:
SMTP Server (Outgoing
plus.smtp.mail.yahoo.com
Messages)
POP3 Server (Incoming
plus.pop.mail.yahoo.com
Messages)
CLI Configuration
Node Command
enable show mail-alarm
configure mail-alarm (disable|enable)
configure mail-alarm auth-account
configure mail-alarm mail-from
configure mail-alarm mail-to
configure mail-alarm server-ip
IPADDR server-port VALUE
configure mail-alarm server-ip
IPADDR server-port Default
configure mail-alarm trap-event
(reboot|link-
change|config.|
firmware|login|port-
blocked| alarm)
(disable|enable)
© Copyright 2016 TRENDnet. All Rights Reserved.
SSL 995
Authentication: Port:
SSL 465
SSL 995
Description
This command displays the Mail Alarm
configurations.
This command disables / enables the
Mail Alarm function.
This command configures the Mail
server authentication account.
This command configures the mail
sender.
This command configures the mail
receiver.
This command configures the mail
server IP address and the TCP port.
This command configures the mail
server IP address and configures 25 as
the server's TCP port.
This command disables / enables mail
trap events.
Web Configuration
Management > Mail Alarm
Parameter Description
State Enable / disable the Mail Alarm function.
Server IP Specifies the mail server's IP address.
Server Port Specifies the TCP port for the SMTP.
Account Name Specifies the mail account name.
Account Password Specifies the mail account password.
Mail From Specifies the mail sender.
Mail To Specifies the mail receiver.
Trap State Enables / disables the mail trap event states.
TI-PG541i
62