TRENDnet TI-PG541i User Manual page 55

TRENDnet User's Guide
configure lldp This command globally enables / disables the LLDP
(disable|enable) function on the Switch.
configure lldp tx-interval This command configures the interval to transmit
the LLDP packets.
configure lldp tx-hold This command configures the tx-hold time which
determines the TTL of the Switch's message.
(TTL=tx-hold * tx-interval)
interface lldp-agent This command configures the LLDP agent function.
(disable|enable|rx-
disable – Disable the LLDP on the specific port.
only|tx-only)
enable – Transmit and Receive the LLDP packet on
the specific port.
tx-only – Transmit the LLDP packet on the specific
port only.
rx-only – Receive the LLDP packet on the specific
port.
configure interface range This command enters the interface configure
gigabitethernet1/0/ node.
PORTLISTS
© Copyright 2016 TRENDnet. All Rights Reserved.
Web Configuration
Advanced Settings > LLDP > Settings
Parameter Description
State Globally enables / disables the LLDP on the Switch.
Tx Interval Configures the interval to transmit the LLDP packets.
Configures the tx-hold time which determines the TTL of the
Tx Hold
Switch's message. (TTL=tx-hold * tx-interval)
Time To Live The hold time for the Switch's information.
Port The port range which you want to configure.
State Enables / disables the LLDP on these ports.
LLDP Status
Port The Port ID.
TI-PG541i
45