TRENDnet TI-PG541i User Manual page 51

TRENDnet User's Guide
alphabet or
The maximum length of the name is 16 characters.
Enter the port numbers you want the Switch to assign to the VLAN
Member Port as members. You can designate multiple port numbers
individually by using a comma (,) and by range with a hyphen (-).
Apply Click Apply to save your changes back to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.
VLAN List
This field displays the index number of the VLAN entry. Click the
VLAN ID
number to modify the VLAN.
VLAN Name This field displays the name of the VLAN.
This field displays the status of the VLAN. Static or Dynamic
VLAN Status
(802.1Q VLAN).
This field displays which ports have been assigned as members of
Member Port
the VLAN. This will display None if no ports have been assigned.
Action Click Delete to remove the VLAN. The VLAN 1 cannot be deleted.
© Copyright 2016 TRENDnet. All Rights Reserved.
hyphens (-) or underscores (_). Tag Settings
Advanced Settings > VLAN > Tag Settings
Parameter Description
Select a VLAN ID to configure its port tagging settings.
VLAN ID
Selecting a port which is a member of the selected VLAN ID will
Tag Port make it a tag port. This means the port will tag all outgoing frames
transmitted with the VLAN ID.
Select All Click Select All to mark all member ports as tag ports.
Deselect All Click Deselect All to mark all member ports as untag ports.
Apply Click Apply to save your changes back to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.
Tag Status
VLAN ID This field displays the VLAN ID.
Tag Ports This field displays the ports that have been assigned as tag ports.
TI-PG541i
41