TRENDnet TI-PG541i User Manual page 16

TRENDnet User's Guide
System Information
CLI Configuration
Node Command
enable show hostname
enable show interface eth0
enable show model
enable show running-config
enable show system-info
enable show uptime
© Copyright 2016 TRENDnet. All Rights Reserved.
Description
This command displays the system's network
name.
This command displays the current Eth0
configurations.
This command displays the system information.
This command displays the current operating
configurations.
This command displays the system's CPU loading
and memory information.
This command displays the system up time.
Web Configuration
System Status > System Information
Parameter Description
Model Name This field displays the model name of the Switch.
Host name This field displays the name of the Switch.
Boot Code Version This field displays the boot code version.
Firmware Version
This field displays the firmware version.
Built Date
This field displays the built date of the firmware.
This field displays whether the DHCP client is enabled on the
DHCP Client
Switch.
TI-PG541i
6