TRENDnet TI-PG541i User Manual page 74

TRENDnet User's Guide
Web Configuration
Management > Maintenance > Configuration
Save Configuration
Press the Save button to save the current settings to the NV-RAM (flash).
Upload / Download Configuration to /from a your server
Follow the steps below to save the configuration file to your PC.

Select the "Press "Download" to save configurations file to your PC".

Click the "Download" button to start the process.
Follow the steps below to load the configuration file from your PC to the Switch.

Select the "Upload configurations file to your Switch".

Select the full path to your configuration file.

Click the Upload button to start the process.
© Copyright 2016 TRENDnet. All Rights Reserved.
Reset the factory default settings of the Switch
Press the Reset button to set the settings to factory default configuration.
The configuration status
Display the configuration status of recorded in the NV-RAM.
Notice:
If the user has changed any configurations, the message displays "The configurations have
been modified!" Otherwise, the message "The configurations are default values."
There are two conditions will change message from "The configurations have been
modified!" to "The configurations are default values."
1. Click "Reset configuration" in web management or do cli command, reload
default-config.
2. Click "Upload configuration" in web management or do cli command,
"archive download-config xxx".
TI-PG541i
64