TRENDnet TI-PG541i User Manual page 18

TRENDnet User's Guide
eth0 management vlan
VLANID
Example: The procedures to configure an IP address for the Switch.

To enter the configure node.
TI-PG541I#configure terminal
TI-PG541I(config)#

To enter the ETH0 interface node.
TI-PG541I(config)#interface eth0
TI-PG541I(config-if)#

To get an IP address from a DHCP server.
TI-PG541I(config-if)#ip dhcp client enable

To configure a static IP address and a gateway for the Switch.
TI-PG541I(config-if)#ip address 192.168.202.111/24
TI-PG541I(config-if)#ip address default-gateway 192.168.202.1
© Copyright 2016 TRENDnet. All Rights Reserved.
This command configures the management
vlan.
Web Configuration
Basic Settings > General Settings > System
Configures a IPv4 address for your Switch in dotted decimal
IP Address
notation. For example, 192.168.10.200.
Enter the IP subnet mask of your Switch in dotted decimal
Subnet Mask
notation for example 255.255.255.0.
Enter the IP address of the default outgoing gateway in dotted
Default Gateway
decimal notation, for example 192.168.10.1.
TI-PG541i
8