Still
Still allows the user to load images from the memory, save images to the memory, and save the images captured.
Start
Load Still
Keyer
P-In-P
Save Still
DSK
Still
Freeze
User
Inputs
Setup
Load Still
Upon selecting "Load Still", the user can then choose the memory location from which the still image is loaded.
The following are the destinations to which the still image can be loaded:
Freeze
•
Input 4
•
Input 3
•
Input 2
•
Input 1
•
•
Still FS3
Still FS2
•
•
Still FS1
Select "Load" to load the still image to the determined destination.
Save Still
"Save Still" allows the user to save the still image to a specific memory location. The user should determine the
source of the still image first. The available sources are listed below:
•
Freeze
Input 4
•
•
Input 3
•
Input 2
•
Input 1
•
Still FS3
•
Still FS2
•
Still FS1
To complete the save, the user can simply select "Save" after determining the memory location.
Freeze
"Freeze" allows the user to load an image to Inputs 1-4 from one of the three sources listed as follows:
•
Still
•
Freeze
•
Live
Still
4
Freeze
1
Live 2
4
Live
22
Load
Freeze
Save
Still
Live 3
4
Live