Table of Contents
Advertisement
Start
Start option is primarily for the user to configure transition effects, such as mix effect, fade-to-black, and wipe. The
sub-options are:
•
Transition
•
Wipe
•
Border
•
Position
Matte
•
Start
Transition
Keyer
P-In-P
Wipe
DSK
Border
Still
Position
User
Inputs
Matte
Setup
Transition
Transition feature allows the user to switch between PVW and PGM views. The user may select the transition
effect and customize the selected effect. The configurable transition effects under this sub-option are Mix Effect
(M/E), Downstream Key (DSK) and Fade-To-Black (FTB).
Wipe
This sub-option provides the user with the capability of Wipe Effect selection and configuration of the border
softness and width of the selected wipe effect.
•
Wipe – Wipe Effect Selection
•
Soft – Low value yields a distinguished border and high value yields a diffused border
•
Width – Low value yields a thin border and high value yields a thick border
Border
After selecting this sub-option, the user will then be allowed to fine-tune the border color by adjusting the Luma,
Saturation and Hue values, i.e. Luma, Sat and Hue.
Position
Position allows the user to adjust the centre position of some wipes (e.g Circle & Elipse) . X represents the
horizontal position and Y represents the vertical position.
X
Positive value: position the wipe centre to the right
Negative value: position the wipe centre to the left
Zero value: Position the wipe centre at the screen
centre
Matte
The user is allowed to configure the Matte Luma, Saturation and Hue under this sub-option.
M/E
30 DSK
Wipe
1 Soft
Luma
90 Sat
X
0% Y
Luma
81 Sat
Y
Positive value: move the wipe centre up
Negative value: move the wipe centre down
Zero value: Position the wipe centre at the screen
centre
18
30 FTB
30
0 Width
10
61 Hue
358.1
0%
86 Hue
299.9
Advertisement
Table of Contents
