Supply Pumps - Graco DC12 Operation & Setup

Performance Monitor Plus
Operator Level Screens
A1 and B1 Rams are located on the base machine. Tandem pumps are optional and will only appear on the screen if
supplied with the system. See Related Manuals section for information on the Tandem option.

Supply Pumps

Fig. 5
Key Description
Auto A or B Supply Auto Mode
Manual A or B supply Manual Mode
A1 In Use Select A1 pump in Auto Mode
A2 In Use Select A2 pump in Auto Mode
A1 Ram OK Status Indicator for Low Level
A2 Ram OK Status Indicator for Low Level
A1 Pump ON/OFF Toggle Button in Manual Mode
A2 Pump ON/OFF Toggle Button in Manual Mode
Previous Screen Access Button
12
Key Description
B1 In Use Select B1 pump in Auto Mode
B2 In Use Select B2 pump in Auto Mode
B1 Ram OK Status Indicator for Low Level
B2 Ram OK Status Indicator for Low Level
B1 Pump ON/OFF Toggle Button in Manual Mode
B2 Pump ON/OFF Toggle Button in Manual Mode
Supply Ready A and B Supply ready indicator
Control Power Control Power Indicator
Dispense Setup Screen Access Button
312767B