Pneumatic Performance Monitor - Graco DC12 Operation & Setup

Pneumatic Performance Monitor

Pneumatic Performance Monitor includes an
all Pneumatic Control Box. This control option is a
monitor only and does not shut down the machine in
the event of an alarm. The Pneumatic Performance
Monitor can be used with or without the Pneumatic
Dispense Valve Control. See product configurator
code C. Pneumatic Performance Monitor is 1 of 4
control choices.
Level Control Off/On Switch and
Indicators
Activates low material warning alarm for both A and
B supply pumps. The indicators are always active.
This control will not stop material dispense.
Pressure Control Off/On Switch and
Indicators
Activates high and low material pressure alarm for
both A and B materials. The indicators are always
active. This control will not stop material dispense.
Silence Alarm Push Button
Silences the audible alarm.
Cycle Counter
Accumulates cycles completed by the meter. Fig. 20
Counter is manually reset.
Pneumatic Horn
Pneumatic Alarm with needle valve for sound
control.
See Pressure Monitor Setup Section of
this manual for detailed information on
pressure monitoring feature included
with this option.
312767B
31