Installing Avaya Site Administration - Avaya S8700 Installing Manual

Media gateway
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
To use Avaya Site Administration, open the application and select the switch (media server) you
want to access. (SAT commands are usable only on the active media server only.) When
prompted, log in.

Installing Avaya Site Administration

If you do not have Avaya Site Administration on your computer, make sure your PC or laptop
first meets the minimum requirements described in
Administration'' on page
Minimum requirements to run Avaya Site Administration
Operating systems
MS Windows 95
MS Windows 98
MS Windows NT 4.0
MS Windows 2000
MS Windows XP/ME
Graphics adapter
Floppy disk drive
CD-ROM
Available hard disk space
Printer port
Network adapter
Free serial ports
You can download Avaya Site Administration to your computer from the Avaya Site
Administration software CD. Place the Avaya Site Administration software CD in the CD-ROM
drive and follow the installation instructions in the Install Wizard. Use the Online Help for the
procedures to establish a switch (media server) record. Use the IP address of the media server
and port 5023.
235:
Processor/RAM
486SL/66/16 MB
Pentium/32 MB
Pentium/64 MB
Pentium-class 300 MHz/64 MB
Pentium-class 3, 600 MHz/256 MB
SVGA with minimum screen resolution of 800 x 600
3-1/2 in. 1.44-MB floppy disk drive
CD-ROM drive (required to install Avaya Site
Administration from CD)
A minimum of 100-MB free hard disk space is required.
The requirement for disk space depends on the size and
number of configuration data sets.
Standard PC or network printer port is required for
connecting to a printer to produce station button labels.
Required for network access to the Avaya S8700 Media
Server, AUDIX, and other network-connected systems.
One free serial port capable of 9600-bps operation is
required for a connection to each serial device (UPS).
We recommend that PCs have at least a 16550A UART or
16550A UART simulator (capable of 56 kbps DTE-speed
connections). USB and internal modems should emulate
this hardware.
A second serial port is required for simultaneous
connection to AUDIX through a serial connection.
May 2003
Accessing the Avaya S8700 Media Server
''Minimum requirements to run Avaya Site
235

Advertisement

Table of Contents
loading

This manual is also suitable for:

G600

Table of Contents