Optical Module Removal (3); Optical Module Insert - Samsung MT3204 Series Installation Manual

3
Figure 80.

Optical Module Removal (3)

1
To inset optical module, do the following:
Push the optical module into the optical module cage within the connector.
Figure 81.

Optical Module Insert

1
[System Inside]
Optical Module
Cage
Inset the optical module's bail, facing the front of the system, to the port.
Rear Side
Do not inset when the optical module's bail is unlocked.
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Handle 90º open
Remove the optical module and the jig by pressing the optical module
Removal Tool's hook grip.
Optical
Connector
Optical Module
System
Optical Module Bail
Handle 45º open
2
2
System
Rear Side
Confidential
Chapter 3 Connecting Cables
89