Figure 56. Fixing Pole Mount Bracket Assembly-Top (Up-Tilting) (7); Table 16. Parts And Tools For Fixing Mmu On The Pole - Samsung MT3204 Series Installation Manual

7
Figure 56. Fixing Pole Mount Bracket Assembly-Top (Up-Tilting) (7)
When fixing the pole mount bracket assembly-top (up-tilting) on a pole, be sure to
check the level of bracket. After finishing the installation, you can adjust the level
minutely.
When occurring poor levelling, adjust the position of fasteners used to fix the pole
mount bracket assembly-top (up-tilting) or its levelling status.
Fixing MMU (Up-Tilting)
Before proceeding with fixing the MMU on the pole, make sure that you have the
items mentioned in the table below:
Table 16. Parts and Tools for Fixing MMU on the Pole
Category
Recommended Torque Value
Working Tools
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
M4 Plate Fixing Screw
Check the level of pole mount bracket assembly-top (up-tilting) on the pole
and adjust the level.
※
center of both lines.
Description
M10 Nut
M4 Screw
 Torque Wrench (100 to 400 lbf·in)
 Torque Wrench Spanner head (apply hexagonal. head: 17 mm)
 Spanner (17 mm)
 Torque Driver (6 to 22 lbfin)
 Screw Driver Bit ('+' No.2)
 Screw Driver ('+' No.2)
If it is level, the bubble of the spirit level is positioned at the
Confidential
Chapter 2 Installing System
217 lbfin
13 lbfin
59